CANOGA PERKINS 9175 Command Reference - Manual (Page 727)

CanogaOS Command Reference
40-56
40.76 logging timestamp
To configure the system to apply a time-stamp to debugging messages or system logging messages,
use the logging timestamps command in global configuration mode. To restore the default timestamp
format, use the no form of this command.
Command Syntax
logging timestamp {bsd | date | iso | none | rfc3164 | rfc3339}
no logging timestamp
bsd BSD style (RFC 3164).
date Date command style.
iso ISO style (RFC 3339).
none No timestamp.
rfc3164 RFC 3164 style (bsd).
rfc3339 RFC 3339 style (iso).
Command Mode
Global configuration
Default
Default timestamp format is BSD.
Usage
Examples
The following is sample output from the logging timestamp command.
Switch(config)# logging timestamp iso
Related Commands
show logging
40.77 show logging
To display the state of system logging (syslog), use the show logging command in privileged EXEC
mode.
Command Syntax
show logging
Command Mode
Privileged EXEC