beautypg.com

3 frequency – CANOGA PERKINS 9175 Command Reference User Manual

Page 321

background image

CanogaOS Command Reference

18-2

destination-ip-address Destionation ip address of sending icmp packet;
destination-hostname Destionation hostname of sending icmp packet;

Command Mode

Ipsla mode

Defaults

none

Examples

In the following example, the type echo protocol ipIcmpEcho command is used to set icmp

packet and destination ip address:

Switch(config)#ip sla monitor 1
Switch(config-ipsla)# type echo protocol ipIcmpEcho 192.168.0.1

Related Commands

show ip sla monitor

18.3 FREQUENCY

Sets the rate at which a specified IP SLA operation repeats.
To turn to default value, use no form of this command.

Command Syntax

frequency seconds

no frequency

Syntax Description

seconds

Time range is from 1 to 4800.
Frequency • timeout • threshold

Command Mode

Ipsla mode

Defaults

Default value is 60 seconds.

Examples

In the following example, the frequency command is used to set the rate at which a specified IP

SLAs operation repeats:

Switch(config)#ip sla monitor 1
Switch(config-ipsla)# frequency 10

Related Commands