CANOGA PERKINS 9175 Command Reference - Manual (Page 122)

CanogaOS Command Reference
7-19
mst configuration mode
Default
Usage
When you map VLANs to an MST instance, the mapping is incremental, and the VLANs specified in the
command are added to or removed from the VLANs that were previously mapped.
Examples
Switch# configure terminal
Switch(config)# vlan database
Switch(config-vlan)# vlan 10
Switch(config-vlan)# exit
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# instange 1 vlan 10
Related Commands
7.30 region
Use this command to create mstp region name
Command Syntax
region name
no region name
name Specify the configuration name. The name string has a maximum length of 32 characters
and is case sensitive.
Command Mode
mst configuration mode
Default
The default region name is an empty string.
Usage
Examples
Switch# configure terminal
Switch(config)# vlan database
Switch(config-vlan)# vlan 10
Switch(config-vlan)# exit
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# region Switch