CANOGA PERKINS 9175 Command Reference - Manual (Page 430)

CanogaOS Command Reference
25-18
Command Mode
Router mode
Defaults
The default is 5 seconds.
Examples
In the following example, the hello-interval command is used to set the
interval after which hello packets are sent out:
Switch(config)# router ldp
Switch(config-router)# hello-interval 35
Related Commands
hold-time
ldp hello-interval
ldp hold-time
25.20 hold-time
Use this command to set the global value for the hold-time after which the LSR
rejects adjacencies. Use the no parameter to revert to the default hold time.
Command Syntax
(no) hold-time number
Syntax Description
number Specifies the hold-time value in seconds, the
range is 3 to 65535
Command Mode
Router mode
Defaults
The default is 15 seconds.
Examples
In the following example, the hold-time command is used to set the global
value for the hold-time after which the LSR rejects adjacencies:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# hold-time 635