CANOGA PERKINS 9175 Command Reference - Manual (Page 670)

CanogaOS Command Reference
39-17
39.24 ftp passive
To set the FTP mode in PASSIVE mode, use the ftp passive command in global configuration mode. To
restore the configuration to the default, use no form of this command.
Command Syntax
ftp passive
no ftp passive
Default
FTP works in Active mode.
Command Mode
Global configuration
Usage
Examples
The following example sets the ftp mode to passive:
Switch(config)# ftp passive
Related Commands
ftp username
ftp password
39.25 show ftp
To display the ftp configurations, use show ftp command in Privileged EXEC mode
Command Syntax
show ftp
Command Mode
Privileged EXEC
Usage
Examples
The following example displays the ftp configurations:
Switch# show ftp
ftp passive mode: on