Yokogawa DAQWORX - Manual (Page 9)

1-1 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Before Operation
1.1 Overview of the DAQLOGGER/DAQLOGGER
Client Package
DAQLOGGER
DAQLOGGER is a software application used to acquire measured or computed data
from a recording device (hereinafter, recorder) connected to a PC that has DAQLOGGER
installed or multiple recorders connected to other PCs. The maximum number of
channels that can be managed is 1600. Also, through Gate software applications, you
can use the DX100P/DX200P, MX100, WT series instruments, µR10000, µR20000,
Controllers, or DAQLOGGER to acquire or monitor data from other devices that are not
directly compatible, including Yokogawa or other manufacturer’s measuring instruments
and OPC servers (DCS and PLC etc.).
Devices That Can Be Accessed
When used in combination with DAQ32Plus, DAQEXPLORER, DAQLOGGER,
MXLOGGER, and Gate software, DAQLOGGER can acquire data from multiple
connected PCs and recorders (uR, VR, DX, CX, MV, DARWIN) via Ethernet. Each
software application can be set up internally with individual systems having their own
logging intervals. The following number of systems are available. Recorders (uR, VR,
DX, CX, MV, DARWIN) allow 1 system per unit.
DAQ32Plus: 1
DAQEXPLORER: up to 16
DAQLOGGER: 1
MXLOGGER: up to 61
GateMODBUS: 1
GateCONTROL: 32
Gate software applications other than GateMODBUS, GateCONTROL or GateEye: up to 16
Up to 32 systems total can be connected using DAQLOGGER. For example, when
acquiring data from 15 DAQEXPLORER systems, 1 DAQ32Plus system, 1 Gate software
system, and 1 DX unit, you can also acquire data from up to 14 of MXLOGGER’s 61
systems. Data acquired from software or from recorders is processed in the same
manner. Communication can be performed with the following versions of the software
programs.
DAQ32Plus R9.01 or later
DAQEXPLORER R1.01 or later
DAQLOGGER R3.01 or later
MXLOGGER R1.01 or later
Gate R1.01 or later
Chapter 1 Before Operation