Yokogawa DAQWORX - Manual (Page 329)

7-153 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
7.8 Setting MV1000/MV2000
• Host Name
Set the MV1000/MV2000’s host name using up to 64 alphanumeric characters.
• Domain Name
Set the network domain name that the MV belongs to using up to 64 characters.
• Server Primary, Server Secondary (not necessary when DNS accession
is enabled)
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain Primary, Domain Secondary
Set up to two domain suffixes: primary and secondary.
Keep Alive
To disconnect when there is no response to the test packets that are periodically sent,
select [ON]. Otherwise, select [OFF].
Time out
To use the application timeout function, select [ON]. Otherwise, select [OFF]. If you
select [ON], a [Timeout time] is displayed.
• Timeout time (min.)
Set the timeout value between 1 and 120 (minutes).
Checking the communication status
The Ethernet communication status can be confirmed with the LED lamp that is provided
on the Ethernet connector on the MV1000/MV2000 rear panel or the [Ethernet link] that
is shown at the upper right of the basic setting screen.
FTP
The data files are automatically transferred to the FTP destination.
File Type Description
Display data file Data files are automatically transferred at each file save interval.
Event data file Files are automatically transferred when the data length of data is
recorded.
Report file Data files are automatically transferred every time a report is created.
Snapshot data file The files are automatically transferred when a snapshot is executed.
They are transferred regardless of the media storage setting.
* Indicates snapshot using the FUNC key, communication command (EV2 command), USER
key, or remote control function.