Yokogawa DAQWORX - Manual (Page 19)

1-11 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Before Operation
Printer (used when printing)
Printer and printer driver supported by the OS
Communication converter (necessary for RS-422 communication)
RS-232/RS-422 converter
Recorder
• µR recorder
µR1000 or µR1800 with communication option (RS-422, /C3).
µR12000 cannot be used (GateµR required to use the µR10000/µR20000).
• VR View Recorder
VR100 (VR104P, VR104D, VR106P, and VR106D) or VR200 (VR202, VR204, VR206,
VR202 S2, VR204 S2, and VR206 S2) with communication option (RS-422, /C3).
• DX DAQSTATION
DX100 (DX102, DX104, DX106, and DX112), DX200 (DX204, DX208, DX210, DX220,
and DX230), DX200C, DX1000 (DX1002, DX1004, DX1006, DX1012, DX1002N,
DX1004N, DX1005N, DX1012N), or DX2000 (DX2004, DX2008, DX2010, DX2020,
DX2030, DX2040, DX2048).
When using serial communications, communication option (RS-232, /C2 or RS-422/
RS-485, /C3).
• MV MobileCorder
MV100 (MV102, MV104, MV106, MV112), MV200 (MV204, MV208, MV210, MV220,
MV230).
When using serial communications, communication option (RS-232, /C2 or RS-422/
RS-485, /C3).
• MVAdvanced
MV1000 (MV1002, MV1004, MV1006, MV1012) or MV2000 (MV2008, MV2010,
MV2030, MV2040, MV2048).
When using serial communications, communication option (RS-232, /C2 or RS-422/
RS-485, /C3).
• CX DAQSTATION
CX1000 (CX1000, CX1006, CX1200, CX1206), CX2000 (CX2000, CX2010, CX2020,
CX2210, CX2220, CX2410, CX2420, CX2610, CX2620).
When using serial communications, communication option (RS-232, -□-1, RS-422/
RS-485, -□-2).
• DARWIN
DA100, DR130, DR200 (DR231, DR241, DR232, and DR242), or DC100 with a
communication option or communication module (Ethernet, RS-232-C, or RS-422-A/
RS-485).
Note
• Data created in 2035 or later cannot be handled.
• DAQLOGGER creates a time stamp based on the clock of the PC in which DAQLOGGER is
installed. Because of this, you should not change the PC’s clock settings or related settings
while DAQLOGGER is running. Also, Windows 2000, and Windows XP operate by default
under the Windows Time service in which the time is automatically set on the PC per a time
server, so you must shut down this service. For details, see the Windows user’s manual.
1.2 PC System Requirements and Recorders That Can Be Connected