Yokogawa DAQWORX - Manual (Page 374)

7-198 IM WX101-01E
7.10 Setting CX Series
The Hardware Configurator can be used to transmit and receive the setup data, change
the setup data, and create new setup data for CX style number S1 to S3.
If you change the system configuration and create new settings, first perform the
“Changing CX System Configuration” on page 7-171.
Loading Setup Data from the CX
Before performing the following procedure, please make sure that the communication
method and parameters are correct. (For details, see section 2.6 “Setting
Communications and Connected Recorder Models.”)
2. The [Receive Data] dialog box opens.
1. Click the Receive button or
[Receive Setting] on the [Comm.] menu.
3. Click the [OK] button to receive the setup data.
Receive
Note
Do not load measured data when entering program control function settings on the CX, or when
a medium is being accessed. Doing so will cause a communications error.