Yokogawa DAQWORX User Manual
Yokogawa Software
Table of contents
Document Outline
- Software License Agreement
- How to Use this Manual
- Contents
- Chapter 1 Before Operation
- Chapter 2 Communication Software
- Chapter 3 Software Configurator
- Chapter 4 DARWIN Hardware Configurator
- 4.1 Using DARWIN Hardware Configurator
- 4.2 Loading Setting Data
- 4.3 Setting Input Range, Span, and Linear Scaling
- 4.4 Alarm Settings
- 4.5 Setting Moving Average and Filter
- 4.6 Recording-related Settings (DR Only)
- 4.7 Selecting Channels to Save (for DC100, and DR with FDD Option Only)
- 4.8 Tag Settings (DC100 or DR Only)
- 4.9 Making Settings Per Channel
- 4.10 Transmission Output Channel Assignment
- 4.11 Setting Math Channel Equations
- 4.12 Copying Channel Settings
- 4.13 Setting Constants
- 4.14 Event/Action, Match Time, and Group Settings
- 4.15 Setting Timers and Summer/Winter Time
- 4.16 Printing Settings (DR Only)
- 4.17 Setting Messages (DC100, DR only)
- 4.18 Setting the Writing Operation (DC100 Only)
- 4.19 Setting A/D Converter Integration Time, Filter, and Scan Interval
- 4.20 Setting Alarm Interval, Hysteresis, and Alarm Display Hold
- 4.21 Setting Relay and Internal Switch Actions
- 4.22 Setting Burn-out, RJC, and (for DR Only) Recording Colors
- 4.23 Report Settings
- 4.24 Setting (TLOG) Math Setup, Temperature Unit, and (DC100 only) SCSI ID Number
- 4.25 Setting FUNC Key, and SET Key Operations (for DC100, and DR only)
- 4.26 Setting the Recording Format (DR only)
- 4.27 Memory-related Settings (DC100 only)
- 4.28 Setting Keylock, Display Update Interval, and Channel/Tag Display Indication (DC100/DR only)
- 4.29 System Configuration
- 4.30 Subunit and Module Configuration
- 4.31 Initializing Settings
- 4.32 Sending Setting Data
- 4.33 Saving Setting Data
- 4.34 Hardware Configurator Display Settings
- 4.35 Printing Settings
- 4.36 Activating Hardware Actions
- Chapter 5 Logger Software
- 5.1 Operating Logger Software
- 5.2 Logging Configuration
- 5.3 Group Settings
- 5.4 Displaying Waveforms on the Monitor
- 5.5 Stopping or Pausing Monitor display
- 5.6 Changing Monitor Display
- 5.7 Cursor Measurement
- 5.8 Starting and Stopping Recording
- 5.9 Icon Display during Monitoring/Recording
- 5.10 Saving and Loading Setting Data
- 5.11 Setting Math Actions, Resetting Alarms, and Starting/Stopping Reports
- 5.12 Reloading DARWIN Hardware Settings
- 5.13 Checking Logging Status, and Printing Waveforms
- 5.14 Using the DDE Server
- 5.15 Using the Auto Processor
- 5.16 Using the Monitor Server
- Chapter 6 Historical Viewer Software
- 6.1 Introducing Historical Viewer Software
- 6.2 Opening Files for Display
- 6.3 General Display Settings
- 6.4 Setting Zones and the Y-Axis Clip
- 6.5 Setting the Waveform Time Axis
- 6.6 Cursor Measurement
- 6.7 Using Cursors to Search for Alarms and Marks
- 6.8 Using Cursors for Statistical Calculations
- 6.9 Notepad Copying
- 6.10 Displaying Alarm Info
- 6.11 Selecting Channel, Tag No., or Tag Comment display
- 6.12 User Defined and Trigger Marks
- 6.13 Saving Display Conditions
- 6.14 Converting the Data Format
- 6.15 File Formats
- 6.16 Outputting Data Divided with Cursors
- 6.17 Printing Measurement Data
- 6.18 Displaying, Converting, and Printing Report Data
- Chapter 7 Tag Editor
- Chapter 8 Calibration
- Chapter 9 Remote Monitor Software
- Chapter 10 File Utility Software
- Chapter 11 Troubleshooting
- Index