Yokogawa DAQWORX - Manual (Page 410)

7-234 IM WX101-01E
PV Event (CX Style Number S3 or Later)
Set the PV event hysteresis in the range of [0.0] to [10.0].
On Style 2 or earlier, the value is set from the setup menu of the [Setting] tab.
Event Output Setting(PV event-relay output/Time event-relay output/
Program pattern end signal)
Turn OFF/ON the relay output
Select the number of the relay output terminal
Relay output action (settings cannot be entered here)
7.10 Setting CX Series