Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set User Manual
Page 584

I/O Interface
Section 10A
10A-61
Features
High resolution -- 16 bit input and 14 bit output converters provide
accurate control capabilities.
Backplane powered -- No external power supply required, reducing
system cost.
User selectable inputs -- Configurable per channel for current or voltage
inputs.
Input channel filtering -- Rejects high frequency noise that couples into
an analog input signal.
Image maps directly into the 1746I adapter.
Isolation -- All analog modules are isolated from each other and from
the backplane.
Description
Specification
Input Channels per Module
2 differential, voltage or current selectable
per channel
Output Channels per Module
2 voltage outputs, not individually isolated
Backplane Current Draw
55mA at 5V dc
115mA at 24 V dc
Communication Format
16 bit Two’s Complement Binary
Field Wiring to Backplane Isolation
500 V dc
Conversion Time
512ms for all channels in parallel
Current/Voltage Ranges
NIO4V
±10 V dc or ±20 mA (input)
±10 V dc (output)
Step Response
Input
Output
60 ms at 95%
2.5 ms at 95%
Maximum Wire Size
#
14 AWG
Terminal Block
Removable
Noise Immunity
NEMA Standard ICS 2-230
Environmental Conditions
Operating temperature
0 to +60
°
C (+32
°
to +140
°
F)
Storage temperature
--40
°
C to +85
°
C (--40
°
to +185
°
F)
Humidity rating
5 to 95% (noncondensing)
Recommended Cable
Belden #8761
Certification
UL 508 listed, CSA 22.2 142 approved
Hazardous Environment Classification
Class I, Division 2 Hazardous Environment
10A.8.1
Analog I/O Specifications
(1746-NIO4V)