General 1746 discrete i/o module specifications – Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set User Manual
Page 577

I/O Interface
Section 10A
10A-54
The connectors used to make the fiber optic connections to the I/O ring are
listed in Table 10A.AM. Each module connected to the system I/O ring
has an optical transmitter and receiver. Fiber optic cables connect
transmitters to receivers to form the I/O ring. Refer to Appendix A for
additional information on fiber optic cables and connectors.
The fiber-optic connectors are located under the front door of the 1746I
module for easy access. Run the fiber-optic cables out the bottom of the
1746I module to allow the front door of the module to close after the
cables have been installed.
Table 10A.AM
1746 I/O Ring Adapter Fiber Optic Connectors
Connector on Digital I/O
Remark
Connected To
I/O (RED)
Output
Receiver on next module in I/O ring
I/O (BLACK)
Input
Transmitter on previous module in I/O ring
The following tables give input and output specifications for the standard
1746 I/O modules available for the 9/Series fiber-optic I/O ring. Contact
your Allen-Bradley sales representative for details on any modules not
listed here. See page 10B-8 for details on other 9/Series compatible 1746
I/O modules.
General 1746 Discrete I/O Module Specifications
Description:
Specification
Noise Immunity
NEMA-Standard ICS 2-230
Vibration (operating)
Displacement -- .015 inch
peak to peak at 5 - 57 Hz
Vibration (operating)
Acceleration -- 2.5 G at 57 - 2000 Hz
Shock (operating)
30 G
Isolation
1500 V
Environmental conditions
Operating temperature
0 to +60
°
C (+32
°
to +140
°
F)
Storage temperature
-40
°
to +85
°
C (--40
°
to +185
°
F)
Humidity rating
5 to 95% (noncondensing)
Certification
UL listed, CSA approved
Hazardous Environment Classification
Class I, Division 2 Hazardous Environment.
А
А
Some modules are excluded from this certification. Refer to the following tables for a complete listing.
10A.6.4
1746 I/O Ring Adapter Fiber
Optic Connection
10A.7
1746 Discrete I/O Racks