Brocade TurboIron 24X Series Configuration Guide - Manual (Page 895)

Brocade TurboIron 24X Series Configuration Guide 861
53-1003053-01
IGMP V3
Displaying IGMP traffic status
To display the traffic status on each virtual routing interface, enter the following command.
NOTE
This report is available on Layer 3 Switches.
Syntax: show ip igmp traffic
The report shows the following information.
TABLE 133 Output of show ip igmp interface
This field Displays
Query interval Displays how often a querier sends a general query on the interface.
Max response The maximum number of seconds a client can wait before it replies to the query.
Group membership
time The number of seconds multicast groups can be members of this group before aging out.
(details) The following is displayed for each interface:
•
The ID of the interface
•
The IGMP version that it is running (default IGMP V2 or configured IGMP V3)
•
The multicast protocol it is running: PIM-DM, PIM-SM
•
Address of the multicast group on the interface
•
If the interface is a virtual routing interface, the physical port to which that interface
belongs, the number of groups on that physical port, whether or not the port is a
querier or a non-querier port, the age of the port, and other multicast information for
the port are displayed.
TABLE 134 Output of show ip igmp traffic
This field Displays
QryV2 Number of general IGMP V2 query received or sent by the virtual routing interface.
QryV3 Number of general IGMP V3 query received or sent by the virtual routing interface.
G-Qry Number of group specific query received or sent by the virtual routing interface.
GSQry Number of source specific query received or sent by the virtual routing interface.
MbrV2 The IGMP V2 membership report.
MbrV3 The IGMP V3 membership report.
Leave Number of IGMP V2 “leave” messages on the interface. (See ToEx for IGMP V3.)
IsIN Number of source addresses that were included in the traffic.
IsEX Number of source addresses that were excluded in the traffic.
TurboIron#show ip igmp traffic
Recv QryV2 QryV3 G-Qry GSQry MbrV2 MbrV3 Leave IsIN IsEX ToIN ToEX ALLOW BLK
v5 29 0 0 0 0 0 0 0 0 0 0 0 0
v18 15 0 0 0 0 30 0 60 0 0 0 0 0
v110 0 0 0 0 0 97 0 142 37 2 2 3 2
Send QryV1 QryV2 QryV3 G-Qry GSQry
v5 0 2 0 0 0
v18 0 0 30 30 0
v110 0 0 30 44 11