Brocade TurboIron 24X Series Configuration Guide - Manual (Page 244)

210 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Configuring LLDP
LLDP configuration details
The show lldp local-info command displays the local information advertisements (TLVs) that will be
transmitted by the LLDP agent.
NOTE
The show lldp local-info output will vary based on LLDP configuration settings
Syntax: show lldp local-info [ports ethernet | all]
If you do not specify any ports or use the keyword all, by default, the report will show the local
information advertisements for all ports.
TurboIron#show lldp local-info
Local port: 5
+ Chassis ID (MAC address): 0000.0017.50bb
+ Port ID (MAC address): 0000.0017.50bf
+ Time to live: 120 seconds
+ System name : "TX24 Router"
+ Port description : "10GigabitEthernet5"
+ System capabilities : bridge, router
Enabled capabilities: bridge, router
+ 802.3 MAC/PHY : auto-negotiation supported, but disabled
Operational MAU type : 10GigBaseSR
+ Link aggregation: aggregated (aggregated port ifIndex: 5)
+ Maximum frame size: 1522 octets
+ Port VLAN ID: none
+ Management address (IPv4): 10.2.2.1
Local port: 6
+ Chassis ID (MAC address): 0000.0017.50bb
+ Port ID (MAC address): 0000.0017.50c0
+ Time to live: 120 seconds
+ System name : "TX24 Router"
+ Port description : "10GigabitEthernet6"
+ System capabilities : bridge, router
Enabled capabilities: bridge, router
+ 802.3 MAC/PHY : auto-negotiation supported, but disabled
Operational MAU type : 10GigBaseSR
+ Link aggregation: aggregated (aggregated port ifIndex: 5)
+ Maximum frame size: 1522 octets
+ Port VLAN ID: none
+ Management address (IPv4): 10.2.2.1