Brocade TurboIron 24X Series Configuration Guide - Manual (Page 302)

268 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Egress buffer thresholds for QoS priorities
• Egress Buffer Threshold for a given Traffic Class for a port – When this is configured, the
specified egress buffer threshold will be applied to a specific traffic class (0 – 7) on a port.
The egress buffer thresholds can be modified to various levels. The default settings are described
in the section
“Default settings for egress buffer thresholds” on page 269. Note that based on the
egress buffer threshold assigned, the system will dynamically control the egress CoS queue size for
a port based on the current buffer usage information from the system.
Figure 6 shows the egress buffer thresholds.