Brocade TurboIron 24X Series Configuration Guide - Manual (Page 766)

732 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Displaying BGP4 information
Syntax: show ip bgp config
Displaying CPU utilization statistics
You can display CPU utilization statistics for BGP4 and other IP protocols.
To display CPU utilization statistics for BGP4 for the previous one-second, one-minute, five-minute,
and fifteen-minute intervals, enter the following command at any level of the CLI.
If the software has been running less than 15 minutes (the maximum interval for utilization
statistics), the command indicates how long the software has been running. Here is an example.
TurboIron#show ip bgp config
Current BGP configuration:
router bgp
address-filter 1 deny any any
as-path-filter 1 permit ^65001$
local-as 65002
maximum-paths 4
neighbor pg1 peer-group
neighbor pg1 remote-as 65001
neighbor pg1 description "TurboIron group 1"
neighbor pg1 distribute-list out 1
neighbor 10.192.169.100 peer-group pg1
neighbor 10.192.169.101 peer-group pg1
neighbor 10.192.169.102 peer-group pg1
neighbor 10.192.169.201 remote-as 65101
neighbor 10.192.169.201 shutdown
neighbor 10.192.169.220 remote-as 65432
network 10.1.1.0 255.255.255.0
network 10.2.2.0 255.255.255.0
redistribute connected
TurboIron#show process cpu
Process Name 5Sec(%) 1Min(%) 5Min(%) 15Min(%) Runtime(ms)
ARP 0.01 0.03 0.09 0.22 9
BGP 0.04 0.06 0.08 0.14 13
ICMP 0.00 0.00 0.00 0.00 0
IP 0.00 0.00 0.00 0.00 0
OSPF 0.00 0.00 0.00 0.00 0
RIP 0.00 0.00 0.00 0.00 0
STP 0.00 0.00 0.00 0.00 0
VRRP 0.00 0.00 0.00 0.00 0