Brocade TurboIron 24X Series Configuration Guide - Manual (Page 454)

420 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Displaying VLAN information
Syntax: show vlans [ | ethernet ]
The parameter specifies a VLAN for which you want to display the configuration
information.
The parameter specifies a port. If you use this parameter, the command lists all the
VLAN memberships for the port.
Displaying VLAN information for specific ports
Use one of the following methods to display VLAN information for specific ports.
To display VLAN information for all the VLANs of which port 1 is a member, enter the following
command.
Syntax: show vlans [ | ethernet []
The parameter specifies a VLAN for which you want to display the configuration
information.
The parameter specifies a port. If you use this parameter, the command lists all the
VLAN memberships for the port.
TurboIron#show vlan 4
Total PORT-VLAN entries: 5
Maximum PORT-VLAN entries: 3210
PORT-VLAN 4, Name [None], Priority level0, Spanning tree Off
Untagged Ports: None
Tagged Ports: 6 9 10 11
Uplink Ports: None
DualMode Ports: 7 8
TurboIron#show vlan 3
Total PORT-VLAN entries: 5
Maximum PORT-VLAN entries: 3210
PORT-VLAN 3, Name [None], Priority level0, Spanning tree Off
Untagged Ports: None
Tagged Ports: 6 7 8 9 10
Uplink Ports: None
DualMode Ports: None
TurboIron#show vlans e 1
Total PORT-VLAN entries: 3
Maximum PORT-VLAN entries: 8
legend: [S=Slot]
PORT-VLAN 100, Name [None], Priority level0, Spanning tree Off
Untagged Ports: (S7) 1 2 3 4
Tagged Ports: None