Brocade TurboIron 24X Series Configuration Guide User Manual
Page 538

504
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Displaying IP configuration information and statistics
The show ip traffic command displays the following information.
TABLE 81
CLI display of IP traffic statistics – Layer 3 Switch
This field...
Displays...
IP statistics
received
The total number of IP packets received by the device.
sent
The total number of IP packets originated and sent by the device.
forwarded
The total number of IP packets received by the device and forwarded to other devices.
filtered
The total number of IP packets filtered by the device.
fragmented
The total number of IP packets fragmented by this device to accommodate the MTU of this
device or of another device.
reassembled
The total number of fragmented IP packets that this device re-assembled.
bad header
The number of IP packets dropped by the device due to a bad packet header.
no route
The number of packets dropped by the device because there was no route.
unknown proto
The number of packets dropped by the device because the value in the Protocol field of the
packet header is unrecognized by this device.
no buffer
This information is used by Brocade customer support.
other errors
The number of packets dropped due to error types other than those listed above.
TurboIron#show ip traffic
IP Statistics
139 received, 145 sent, 0 forwarded
0 filtered, 0 fragmented, 0 reassembled, 0 bad header
0 no route, 0 unknown proto, 0 no buffer, 0 other errors
ICMP Statistics
Received:
0 total, 0 errors, 0 unreachable, 0 time exceed
0 parameter, 0 source quench, 0 redirect, 0 echo,
0 echo reply, 0 timestamp, 0 timestamp reply, 0 addr mask
0 addr mask reply, 0 irdp advertisement, 0 irdp solicitation
Sent:
0 total, 0 errors, 0 unreachable, 0 time exceed
0 parameter, 0 source quench, 0 redirect, 0 echo,
0 echo reply, 0 timestamp, 0 timestamp reply, 0 addr mask
0 addr mask reply, 0 irdp advertisement, 0 irdp solicitation
UDP Statistics
1 received, 0 sent, 1 no port, 0 input errors
TCP Statistics
0 active opens, 0 passive opens, 0 failed attempts
0 active resets, 0 passive resets, 0 input errors
138 in segments, 141 out segments, 4 retransmission
RIP Statistics
0 requests sent, 0 requests received
0 responses sent, 0 responses received
0 unrecognized, 0 bad version, 0 bad addr family, 0 bad req format
0 bad metrics, 0 bad resp format, 0 resp not from rip port
0 resp from loopback, 0 packets rejected