Clearing port security statistics, Clearing restricted mac addresses, Clearing violation statistics – Brocade TurboIron 24X Series Configuration Guide User Manual
Page 1030: Displaying port security information

996
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Clearing port security statistics
TurboIron(config)#int e 11
TurboIron(config-if-e10000-11)#port security
TurboIron(config-port-security-e10000-11)#violation shutdown 5
Syntax: violation shutdown <minutes>
You can specify from 0 – 1440 minutes. Specifying 0 shuts down the port permanently when a
security violation occurs.
Clearing port security statistics
You can clear restricted MAC addresses and violation statistics from ports globally (on all ports) or
on individual ports.
Clearing restricted MAC addresses
To clear all restricted MAC addresses globally, enter the following command.
TurboIron#clear port security restricted-macs all
To clear restricted MAC addresses on a specific port, enter a command such as the following.
TurboIron#clear port security restricted-macs e 5
Syntax: clear port security restricted-macs all | ethernet
The <portnum> parameter is a valid port number.
Clearing violation statistics
To clear violation statistics globally, enter the following command.
TurboIron#clear port security statistics all
To clear violation statistics on a specific port, enter a command such as the following.
TurboIron#clear port security statistics e 5
Syntax: clear port security statistics all | ethernet
The
Displaying port security information
You can display the following information about the port security feature:
•
The port security settings for an individual port or for all the ports on a specified module
•
The secure MAC addresses configured on the device
•
Port security statistics for an interface or for a module