Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1103)

Brocade TurboIron 24X Series Configuration Guide 1069
53-1003053-01
Syslog messages
Notification OSPF virtual intf config error,
rid , intf addr ,
pkt src addr ,
error type , pkt type Indicates that an OSPF virtual routing
interface configuration error has occurred.
The is the router ID of the
device.
The is the IP address of the
interface on the device.
The is the IP address of the
interface from which the device received
the error packet.
The can be one of the
following:
•
bad version
•
area mismatch
•
unknown NBMA neighbor
•
unknown virtual neighbor
•
authentication type mismatch
•
authentication failure
•
network mask mismatch
•
hello interval mismatch
•
dead interval mismatch
•
option mismatch
•
unknown
The can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
Notification OSPF virtual intf rcvd bad pkt,
rid , intf addr ,
pkt src addr ,
pkt type Indicates that an OSPF interface received a
bad packet.
The is the router ID of the
device.
The is the IP address of the
interface on the device.
The is the IP address of the
interface from which the device received
the authentication failure.
The can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation