Brocade TurboIron 24X Series Configuration Guide - Manual (Page 38)

4 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Supported features
ACL-Based Rate Limiting:
•
TurboIron X Series devices support
ACL-based fixed and adaptive rate
limiting on inbound ports
Yes
ACL filtering based on VLAN membership
or VE port membership Yes
ACL logging of denied packets:
•
ACL logging is supported for denied
packets, which are sent to the CPU
for logging
•
ACL logging is not supported for
permitted packets
•
Packets that are denied by ACL
filters are logged in the Syslog
based on a sample time-period.
Yes
ACL statistics Yes
Asymmetric flow control:
•
Responds to flow control packets,
but does not generate them
Yes
Auto-negotiation Yes
Broadcast, multicast, and
unknown-unicast rate limiting Yes
Boot and reload after 5 minutes at or
above shutdown temperature Yes
Cut-through switching Yes
DiffServ support Yes
Digital Optical Monitoring Yes
Displaying interface names in Syslog Yes
Displaying TCP/UDP port numbers in
Syslog messages Yes
DSCP Mapping for values 1 through 8 Yes
Dynamic buffer allocation Yes
Egress buffer thresholds Yes
Fixed rate limiting:
•
TurboIron X Series devices support:
•
Port-based rate limiting on
inbound ports
•
Not supported on 10 GbE ports
on TurboIron X Series devices.
•
Fixed rate limiting is not
supported on tagged ports in
the full Layer 3 router image
Yes
TABLE 5 Supported system-level features (Continued)
Category, description, and configuration
notes TurboIron X Series