beautypg.com

Brocade TurboIron 24X Series Configuration Guide User Manual

Page 1011

background image

Brocade TurboIron 24X Series Configuration Guide

977

53-1003053-01

Displaying 802.1X information

Syntax: show dot1x config ethernet

The parameter is a valid port number.

The following table lists the fields in the display.

Displaying information about the dot1x MAC sessions on each port

The show dot1x mac-session command displays information about the dot1x-mac-sessions on
each port on the device. Starting in software release 02.2.00, the output also shows the
authenticator PAE state.

TABLE 150

Output from the show dot1x config command

This field...

Displays...

Port-Control

The configured port control type for the interface. This can be one of the following:
force-authorized – The controlled port is placed unconditionally in the authorized
state, allowing all traffic. This is the default state for ports on the device.
force-unauthorized – The controlled port is placed unconditionally in the
unauthorized state. No authentication takes place for any connected 802.1X Clients.
auto – The authentication status for each 802.1X Client depends on the
authentication status returned from the RADIUS server.

filter strict security

Whether strict security mode is enabled or disabled on the interface.

PVID State

The port default VLAN ID (PVID) and the state of the port PVID. The PVID state can be
one of the following
Normal – The port PVID is not set by a RADIUS server, nor is it the restricted VLAN.
RADIUS – The port PVID was dynamically assigned by a RADIUS server.
RESTRICTED – The port PVID is the restricted VLAN.

Original PVID

The originally configured (not dynamically assigned) PVID for the port.

PVID mac total

The number of devices transmitting untagged traffic on the port PVID.

PVID mac authorized

The number of devices transmitting untagged traffic on the port PVID as a result of
dynamic VLAN assignment.

num mac sessions

The number of dot1x-mac-sessions on the port.

num mac authorized

The number of authorized dot1x-mac-sessions on the port.

TurboIron#show dot1x config e 1

Port-Control : control-auto

filter strict security : Enable

PVID State : Restricted (10)

Original PVID : 10

PVID mac total : 1

PVID mac authorized : 0

num mac sessions : 1

num mac authorized : 0