Brocade TurboIron 24X Series Configuration Guide User Manual
Page 191
Brocade TurboIron 24X Series Configuration Guide
157
53-1003053-01
Displaying global IPv6 information
Syntax: show ipv6 tcp status <local-ip-address>
•
The <local-ip-address> parameter can be the IPv4 or IPv6 address of the local interface over
which the TCP connection is taking place.
•
The <local-port-number> parameter is the local port number over which a TCP connection is
taking place.
•
The <remote-ip-address> parameter can be the IPv4 or IPv6 address of the remote interface
over which the TCP connection is taking place.
•
The <remote-port-number> parameter is the local port number over which a TCP connection is
taking place.
This display shows the following information.
TABLE 36
Specific IPv6 TCP connection fields
This field...
Displays...
TCP =<location>
The location of the TCP.
This field provides a general summary of the
following:
•
The local IPv4 or IPv6 address and port
number.
•
The remote IPv4 or IPv6 address and port
number.
•
The state of the TCP connection. For
information on possible states, refer to
on page 111.
•
The port numbers of the local interface.
Send: initial sequence number =
The initial sequence number sent by the local
router.
Send: first unacknowledged sequence number =
The first unacknowledged sequence number sent
by the local router.
Send: current send pointer =
The current send pointer.
Send: next sequence number to send =
The next sequence number sent by the local
router.
Send: remote received window = <number>
The size of the remote received window.
TurboIron#show ipv6 tcp status 2000:4::110 179 2000:4::106 8222
TCP: TCP = 0x217fc300
TCP: 2000:4::110:179 -> 2000:4::106:8222: state: ESTABLISHED Port: 1
Send: initial sequence number = 242365900
Send: first unacknowledged sequence number = 242434080
Send: current send pointer = 242434080
Send: next sequence number to send = 242434080
Send: remote received window = 16384
Send: total unacknowledged sequence number = 0
Send: total used buffers 0
Receive: initial incoming sequence number = 740437769
Receive: expected incoming sequence number = 740507227
Receive: received window = 16384
Receive: bytes in receive queue = 0
Receive: congestion window = 1459