Brocade TurboIron 24X Series Configuration Guide User Manual
Page 1088

1054
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Syslog messages
Information
MAC Filter removed from port 
id=
Indicates a MAC filter was removed from the 
specified port by the specified user during 
the specified session. 
web, or snmp.
were removed. 
Information
Security: Password has been changed for 
user 
Password of the specified user has been 
changed during the specified session ID or 
type. 
ssh, web, or snmp.
Informational
ethernet 
The specified ports were logically brought 
down while singleton was configured on the 
port.
Informational
ethernet 
The specified ports were logically brought 
up while singleton was configured on the 
port.
Informational
A user has logged into the Privileged EXEC 
mode of the CLI.
The 
Informational
A user has logged into the USER EXEC mode 
of the CLI.
The 
Informational
mode of the CLI.
The 
Informational
A user has logged out of the USER EXEC 
mode of the CLI.
The 
Informational
ACL 
from console | telnet | ssh | web | snmp 
session
A user created, modified, deleted, or 
applied an ACL through a Web, SNMP, 
console, SSH, or Telnet session. 
Informational
Bridge is new root, vlan 
root ID 
A Spanning Tree Protocol (STP) topology 
change has occurred, resulting in the 
device becoming the root bridge.
The 
the STP topology change occurred.
The 
Informational
Bridge root changed, vlan 
root ID 
A Spanning Tree Protocol (STP) topology 
change has occurred.
The 
the STP topology change occurred.
The 
The 
connected to the new root bridge.
TABLE 176
Brocade Syslog messages (Continued)
Message level
Message
Explanation
