Brocade TurboIron 24X Series Configuration Guide User Manual
Page 637
Brocade TurboIron 24X Series Configuration Guide
603
53-1003053-01
Displaying CPU utilization statistics
To display utilization statistics for a specific number of seconds, enter a command such as the
following.
When you specify how many seconds’ worth of statistics you want to display, the software selects
the sample that most closely matches the number of seconds you specified. In this example,
statistics are requested for the previous two seconds. The closest sample available is actually for
the previous 1 second plus 80 milliseconds.
Syntax: show process cpu [
The
parameter, the command lists the usage statistics only for the specified number of seconds. If you
do not use this parameter, the command lists the usage statistics for the previous one-second,
one-minute, five-minute, and fifteen-minute intervals.
TurboIron#show process cpu
The system has only been up for 6 seconds.
Process Name
5Sec(%)
1Min(%)
5Min(%)
15Min(%)
Runtime(ms)
ARP
0.01
0.00
0.00
0.00
0
BGP
0.00
0.00
0.00
0.00
0
ICMP
0.01
0.00
0.00
0.00
1
IP
0.00
0.00
0.00
0.00
0
OSPF
0.00
0.00
0.00
0.00
0
RIP
0.00
0.00
0.00
0.00
0
STP
0.00
0.00
0.00
0.00
0
VRRP
0.00
0.00
0.00
0.00
0
TurboIron#show process cpu 2
Statistics for last 1 sec and 80 ms
Process Name
Sec(%)
Time(ms)
ARP
0.00
0
BGP
0.00
0
ICMP
0.01
1
IP
0.00
0
OSPF
0.00
0
RIP
0.00
0
STP
0.01
0
VRRP
0.00
0