Tested ssh2 clients, Supported features, Unsupported features – Brocade TurboIron 24X Series Configuration Guide User Manual
Page 154
120
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
SSH version 2 support
•
SSH Fingerprint Format
•
SSH Protocol Assigned Numbers
•
SSH Transport Layer Encryption Modes
•
SCP/SFTP/SSH URI Format
Tested SSH2 clients
The following SSH clients have been tested with SSH2:
•
SSH Secure Shell 3.2.3
•
Van Dyke SecureCRT 4.0 and 4.1
•
F-Secure SSH Client 5.3 and 6.0
•
PuTTY 0.54 and 0.56
•
OpenSSH 3.5_p1 and 3.6.1p2
•
Solaris Sun-SSH-1.0
NOTE
The devices support client public key sizes of 2048 bits or less.
Supported features
SSH2 (Secure Shell version 2 protocol) provides an SSH server. The SSH server allows secure
remote access management functions on a device. SSH provides a function that is similar to
Telnet, but unlike Telnet, SSH provides a secure, encrypted connection.
SSH2 support includes the following:
•
Key exchange methods are diffie-hellman-group1-sha1
•
The public key algorithm is ssh-dss.
•
Encryption is provided with 3des-cbc, aes128-cbc, aes192-cbc or aes256-cbc. AES encryption
has been adopted by the U.S. Government as an encryption standard.Refer to
•
Data integrity is ensured with hmac-sha1.
•
Supported authentication methods are Password and publickey.
Unsupported features
The following are not supported with SSH2
•
Compression
•
TCP/IP port forwarding, X11 forwarding, and secure file transfer
•
SSH version 1