beautypg.com

1 capabilities, 3 capabilities – Brocade TurboIron 24X Series Configuration Guide User Manual

Page 237

background image

Brocade TurboIron 24X Series Configuration Guide

203

53-1003053-01

Configuring LLDP

Syntax: [no] lldp advertise system-name ports ethernet | all

802.1 capabilities

Except for the VLAN name, the device will advertise the following 802.1 attributes when LLDP is
enabled on a global basis:

VLAN name (not automatically advertised)

Untagged VLAN ID

VLAN name
The VLAN name TLV contains the name and VLAN ID of a VLAN configured on a port. An LLDPDU
may include multiple instances of this TLV, each for a different VLAN.

To advertise the VLAN name, enter a command such as the following.

TurboIron(config)#lldp advertise vlan-name vlan 99 ports e 4 to 12

The VLAN name will appear similar to the following on the remote device, and in the CLI display
output on the device (show lldp local-info).

VLAN name (VLAN 99): “Voice-VLAN-99”

Syntax: [no] lldp advertise vlan-name vlan ports ethernet | all

For , enter the VLAN ID to advertise.

Untagged VLAN id
The port VLAN ID TLV advertises the Port VLAN Identifier (PVID) that will be associated with
untagged or priority-tagged frames. If the port is not an untagged member of any VLAN (i.e., the
port is strictly a tagged port), the value zero will indicate that.

By default, the port VLAN ID is automatically advertised when LLDP is enabled on a global basis. To
disable this advertisement, enter a command such as the following.

TurboIron(config)#no lldp advertise port-vlan-id ports e 4 to 12

The untagged VLAN ID will appear similar to the following on the remote device, and in the CLI
display output on the device (Refer to show lldp local-info command on page 625).

Port VLAN ID: 99

Syntax: [no] lldp advertise port-vlan-id ports ethernet | all

802.3 capabilities

Except for Power-via-MDI information, the device will advertise the following 802.3 attributes when
LLDP is enabled on a global basis:

Link aggregation information

MAC/PHY configuration and status

Maximum frame size

Power-via-MDI information (not automatically advertised)

Link aggregation
The link-aggregation TLV indicates the following: