Brocade TurboIron 24X Series Configuration Guide - Manual (Page 531)

Brocade TurboIron 24X Series Configuration Guide 497
53-1003053-01
Displaying IP configuration information and statistics
To display detailed IP information for a specific interface, enter a command such as the following.
Displaying ARP entries
You can display the ARP cache and the static ARP table. The ARP cache contains entries for
devices attached to the Layer 3 Switch. The static ARP table contains the user-configured ARP
entries. An entry in the static ARP table enters the ARP cache when the entry interface comes up.
Displaying the ARP cache
To display the contents of the ARP cache, enter the following command at any CLI level.
Syntax: show arp [ethernet | mac-address [] |
[]] []
The parameter lets you restrict the display to entries for a specific port.
The mac-address parameter lets you restrict the display to entries for a specific
MAC address.
The parameter lets you specify a mask for the mac-address parameter, to
display entries for multiple MAC addresses. Specify the MAC address mask as “f”s and “0”s, where
“f”s are significant bits.
Status The link status of the interface. If you have disabled the interface with the disable command,
the entry in the Status field will be “administratively down”. Otherwise, the entry in the Status
field will be either “up” or “down”.
Protocol Whether the interface can provide two-way communication. If the IP address is configured, and
the link status of the interface is up, the entry in the protocol field will be “up”. Otherwise the
entry in the protocol field will be “down”.
TABLE 76 CLI display of interface IP configuration information (Continued)
This field... Displays...
TurboIron#show ip interface ethernet 1
Interface Ethernet 1
port state: UP
ip address: 192.168.9.51 subnet mask: 255.255.255.0
encapsulation: ETHERNET, mtu: 1500, metric: 1
directed-broadcast-forwarding: disabled
proxy-arp: disabled
ip arp-age: 10 minutes
Ip Flow switching is disabled
No Helper Addresses are configured.
No inbound ip access-list is set
No outgoing ip access-list is set
TurboIron#show arp
Total number of ARP entries: 5
IP Address MAC Address Type Age Port Status
1 10.95.6.102 0000.00fc.ea21 Dynamic 0 6 Valid
2 10.95.6.18 0000.00d2.04ed Dynamic 3 6 Pend
3 10.95.6.54 0000.00ab.cd2b Dynamic 0 6 Pend
4 10.95.6.101 0000.007c.a7fa Dynamic 0 6 Valid
5 10.95.6.211 0000.0038.ac9c Dynamic 0 6 Valid