Brocade TurboIron 24X Series Configuration Guide - Manual (Page 213)

Brocade TurboIron 24X Series Configuration Guide 179
53-1003053-01
Using FDP
• FDP information for an interface on the device you are managing
• FDP packet statistics
NOTE
If the Brocade device has intercepted CDP updates, then the CDP information is also displayed.
Displaying neighbor information
To display a summary list of all the neighbors that have sent FDP updates to this device, enter the
following command.
Syntax: show fdp neighbor [ethernet] [detail]
The ethernet parameter lists the information for updates received on the specified port.
The detail parameter lists detailed information for each device.
The show fdp neighbor command, without optional parameters, displays the following information.
To display detailed information, enter the following command.
TABLE 38 Summary FDP and CDP neighbor information
This line... Displays...
Device ID The hostname of the neighbor.
Local Int The interface on which this device received an FDP or CDP update for
the neighbor.
Holdtm The maximum number of seconds this device can keep the information
received in the update before discarding it.
Capability The role the neighbor is capable of playing in the network.
Platform The product platform of the neighbor.
Port ID The interface through which the neighbor sent the update.
TurboIronA#show fdp neighbor
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
(*) indicates a CDP device
Device ID Local Int Holdtm Capability Platform Port ID
-------------- ------------ ------ ---------- ----------- -------------
TurboIronB Eth 9 178 Router TurboIron Rou Eth 9