Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 97)

Unified IP MIB Reference 71
53-1003106-01
MEF Service OAM PM
2
spdStaticActions
The following table lists the SPD static actions scalar objects.
MEF Service OAM PM
The Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and
Brocade NetIron CER series devices are provided with the following Metro Ethernet Forum (MEF)
Service OAM (SOAM) Performance Monitoring (PM) MIB.
Ethernet global performance monitoring
configuration table
The mefSoamPmGlobalTable represents the Ethernet global performance monitoring configuration
MIB objects. The SNMP GET and GET-NEXT requests are supported.
Object Object identifier Access
spdDropAction 1.3.6.1.2.1.153.1.13.1 Indicates that a packet must be
dropped and no action or packet
logging is done.
spdDropActionLog 1.3.6.1.2.1.153.1.13.2 Indicates that a packet must be
dropped and an action or packet
logging is required.
spdAcceptAction 1.3.6.1.2.1.153.1.13.3 Indicates that a packet must be
accepted (or passed-through) and no
action or packet logging is done.
spdAcceptActionLog 1.3.6.1.2.1.153.1.13.4 Indicates that a packet must be
accepted (or passed-through) and an
action or packet logging is required.
Object group name Object identifier Supported?
mefSoamPmGlobalOperNextIndex 1.3.6.1.4.1.15007.1.3.1.1.1.1.1 Yes. Read-only.
mefSoamPmGlobalLmSingleEndedRes
ponder 1.3.6.1.4.1.15007.1.3.1.1.1.1.2 Yes. Read-only.
NOTE: Always returns the
value True and this
object is supported
only on the Brocade
NetIron CES and
Brocade NetIron CER
series platforms.