Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 631)

Unified IP MIB Reference 605
53-1003106-01
MPLS interface table
60
MPLS interface table
The MPLS interface table contains all configured MPLS interfaces. It will be indexed by the ifIndex
of the MPLS-enabled port or the VE interface. Use the show mpls interface command to display the
configured information of interfaces and Admin Group settings.
NOTE
The MPLS interface table is a read-only table and supports the GET, GETBULK, and GETNEXT
operations.
Name, OID, and syntax Access Description
brcdMplsInterfaceTable
brcdlp.1.2.15.1.1.3 None The list of MPLS-enabled interfaces.
brcdMplsInterfaceIndex
brcdlp.1.2.15.1.1.3.1.1
Syntax: Unsigned32 None The ifIndex of the MPLS-enabled port or VE interface.
brcdMplsInterfaceAdminGroup
brcdlp.1.2.15.1.1.3.1.2
Syntax: MplsTunnelAffinity Read-write Specifies to which administrative groups this
MPLS-enabled interface belongs to. It is represented in
bitmapped format where each bit from 0 through 31 maps
to the (internal) group ID. If a bit is set, it indicates that the
corresponding group ID is configured for a particular MPLS
interface.
brcdMplsInterfaceRowStatus
brcdlp.1.2.15.1.1.3.1.3
Syntax: RowStatus Read-only The row status of an entry.
NOTE: A set request to this table is not supported. Always
returns “active” for the existing entries.