Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 640)

614 Unified IP MIB Reference
53-1003106-01
Route map set configuration table
62
Route map set configuration table
The following table contains MIB objects of the route map set configuration table.
brcdRouteMapMatchValue
(continued)
•
matchRouteType(21)—Specifies the route type used to match.
The value is a string representation of one of the following
decimal values: ospfExternalType1(2), ospfExternalType2(3),
ospfInternal(4), isisLevel1(5), or isisLevel2(6). The other values
are not supported. The SNMP agent does ASCII to integer
conversion before using the value.
•
matchTags(22)—Specifies a list of tag values matched (string
representation of decimal values). Each tag value is separated
by one or more spaces. There cannot be more than 16 values.
brcdRouteMapMatchCliStrin
g
brcdIp.1.1.3.39.1.1.2.1.4
Syntax: DisplayString Read-only Represents an equivalent CLI route map match command for a pair
of brcdRouteMapMatchType and brcdRouteMapMatchValue objects.
brcdRouteMapMatchRowSt
atus
brcdIp.1.1.3.39.1.1.2.1.5
Syntax: RowStatus Read-create The following options are supported:
•
active(1)—To return GET and GET-NEXT requests.
•
createAndGo(4)—To add a new row.
•
destroy(6)—To remove a row.
The other values in the enumeration are not supported.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdRouteMapSetTable
brcdIp.1.1.3.39.1.1.3 None The route map set clause configuration table for a given route map.
brcdRouteMapSetSequence
brcdIp.1.1.3.39.1.1.3.1.1
Syntax: Integer32 None Identifies the position in the table where the match rule is added.
•
If the brcdRouteMapSetRowStatus object is set to the
createAndGo(4) value, and if there is no match rule present at
the brcdRouteMapSetIndex position, then a row is inserted.
•
If a match rule is present, it must be of same kind. If not, then
the SET request fails. The application obtains the value for the
object in the last row and uses the next value to insert a new
row in the table.
brcdRouteMapSetType
brcdIp.1.1.3.39.1.1.3.1.2
Syntax: Integer None A pair of brcdRouteMapSetType and brcdRouteMapSetValue
objects specify a particular set clause.