Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 543)

Unified IP MIB Reference 517
53-1003106-01
OSPF virtual interface table
50
OSPF virtual interface table
The OSPF virtual interface table describes the virtual links that the OSPF process is configured to
carry.
References:
• RFC 1583 “OSPF Version 2”, section C.4 Virtual link parameters
• RFC 1583 “OSPF Version 2”, section 9 The Interface Data Structure
snOspfIf2Md5ActivationWaitTime
brcdIp.1.2.4.4.2.1.15
Syntax: Integer Read-write Determines when a newly configured MD5 authentication key is
valid. This parameter provides a graceful transition from one
MD5 key to another without disturbing the network. All new
packets transmitted after the key activation wait time interval
use the newly configured MD5 key. OSPF packets that contain
the old MD5 key are accepted for up to five minutes after the
new MD5 key is in operation. The range for the key activation
wait time is from 0 through 14400 seconds.
Default: 300 seconds
snOspfIf2AreaIdFormat
brcdIp.1.2.4.4.2.1.16
Syntax: Integer Read-only Specifies the format of how Area ID will be entered in the
“snOspfIfAreaId” object:
•
integer(0) – Integer
•
ipAddress(1) – IP Address
snOspfIf2PassiveMode
brcdIp.1.2.4.4.2.1.17
Syntax: Integer Read-write Indicates if passive mode is enabled on this interface:
•
disabled(0)
•
enabled(1)
snOspfIf2DatabaseFilterAllOut
brcdIp.1.2.4.4.2.1.18
Syntax: Integer Read-write Determines if the filtering of an outgoing OSPF LSA on this
interface is enabled:
•
disabled(0) – Filtering is disabled.
•
enabled(1) – Filtering is enabled.
snOspfIf2MtuIgnore
brcdIp.1.2.4.4.2.1.19
Syntax: Integer Read-write Determines if the MTU detection mode of this interface is
enabled:
•
disabled(0) – MTU detection mode is disabled.
•
enabled(1) – MTU detection mode is enabled.
snOspfIf2NetworkP2mp
brcdIp.1.2.4.4.2.1.20
Syntax: Integer Read-write Determines if the P2MP mode of this interface is enabled:
•
disabled(0) – P2MP mode is disabled.
•
enabled(1) – P2MP mode is enabled.
snOspfIf2NetworkP2pt
brcdIp.1.2.4.4.2.1.21
Syntax: Integer Read-write This object enables and disables OSPF point-to-point mode on
an interface:
•
disabled(0) – Disables the feature.
•
enabled(1) – Enables the feature.
snOspfIf2NetworkNonBroadcast
brcdIp.1.2.4.4.2.1.22
Syntax: Integer Read-write This object enables or disables non-broadcast mode of this
interface.
Name, OID, and syntax Access Description