beautypg.com

Mplsldpentity table, Mplsldpentityldpid, Mplsldpentityindex – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual

Page 69: Mplsldpentityprotocolversion, Mplsldpentityadminstatus, Mplsldpentityoperstatus, Mplsldpentitytcpport, Mplsldpentityudpdscport, Mplsldpentitymaxpdulength, Mplsldpentitykeepaliveholdtimer

background image

Unified IP MIB Reference

43

53-1003106-01

RFC 3815: Definitions of Managed Objects for the Multiprotocol Label Switching (MPLS), Label Distribution

2

mplsLdpEntity table

This mplsLdpEntity table contains information about MPLS Label Distribution Protocol Entities
which exist on this Label Switching Router (LSR) or Label Edge Router (LER).

NOTE

The following table currently supports the read-only access.

Object

Object identifier

Supported?

mplsLdpEntityLdpId

1.3.6.1.2.1.10.166.4.1.2.3.1.1

Index

mplsLdpEntityIndex

1.3.6.1.2.1.10.166.4.1.2.3.1.2

Index

mplsLdpEntityProtocolVersion

1.3.6.1.2.1.10.166.4.1.2.3.1.3

Yes

mplsLdpEntityAdminStatus

1.3.6.1.2.1.10.166.4.1.2.3.1.4

The administrative status of the
LDP Entity.
The values are:

up(1) mapped to enable(1)

down(2) or testing(3)
mapped to disable(2)

mplsLdpEntityOperStatus

1.3.6.1.2.1.10.166.4.1.2.3.1.5

Displays the operational status of
this LDP Entity.
The values are:

up(1) mapped to enabled(2)

down(2) mapped to
disabled(3)

testing(3) mapped to
disabled(3)

unknown(4) mapped to
unknown(1)

dormant(5) mapped to
disabled(3)

notpresent(6) mapped to
disabled(3)

mplsLdpEntityTcpPort

1.3.6.1.2.1.10.166.4.1.2.3.1.6

Yes

mplsLdpEntityUdpDscPort

1.3.6.1.2.1.10.166.4.1.2.3.1.7

Yes

mplsLdpEntityMaxPduLength

1.3.6.1.2.1.10.166.4.1.2.3.1.8

Yes

mplsLdpEntityKeepAliveHoldTimer

1.3.6.1.2.1.10.166.4.1.2.3.1.9

Yes

mplsLdpEntityHelloHoldTimer

1.3.6.1.2.1.10.166.4.1.2.3.1.10

Yes

mplsLdpEntityInitSessionThreshold

1.3.6.1.2.1.10.166.4.1.2.3.1.11

Yes

mplsLdpEntityLabelDistMethod

1.3.6.1.2.1.10.166.4.1.2.3.1.12

Yes

mplsLdpEntityLabelRetentionMode

1.3.6.1.2.1.10.166.4.1.2.3.1.13

Yes

mplsLdpEntityPathVectorLimit

1.3.6.1.2.1.10.166.4.1.2.3.1.14

Yes

mplsLdpEntityHopCountLimit

1.3.6.1.2.1.10.166.4.1.2.3.1.15

Yes

mplsLdpEntityTransportAddrKind

1.3.6.1.2.1.10.166.4.1.2.3.1.16

The IP address of the interface
from which hello messages are
sent is used as the transport
address in the hello message.
Returns interface(1).

This manual is related to the following products: