Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 385)

Unified IP MIB Reference 359
53-1003106-01
MAC filter port access table
32
.
MAC filter ifaccess table
Name, OID, and syntax Access Description
snMacFilterPortAccessTable
brcdIp.1.1.3.10.2
NOTE: This object is not
supported on the Brocade
MLXe, Brocade NetIron
MLX, Brocade NetIron
XMR, Brocade NetIron
CES, Brocade NetIron CER
series devices.
None MAC filter port access table.
snMacFilterPortAccessPortIndex
brcdIp.1.1.3.10.2.1.1
Syntax: Integer Read-only The port index.
For FastIron and NetIron products, the port index value is from
1 through 42.
For virtual router interfaces:
•
15 – Slot number
•
1 through 60 – Virtual router port, which is the port
number.
snMacFilterPortAccessFilters
brcdIp.1.1.3.10.2.1.2
Syntax: OCTET STRING Read-write Shows the filter numbers of the ports. The first octet
corresponds to the first filter number, the second octet to the
second filter number, and so on.
snMacFilterPortAccessRowStatus
brcdIp.1.1.3.10.2.1.3
Syntax: Integer Read-write Controls the management of the table rows. The following
values can be written:
•
delete(3) – Delete the row.
•
create(4) – Create a new row.
•
modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
snMacFilterIfAccessTable
brcdIp.1.1.3.10.3 None MAC filter port access table.
snMacFilterIfAccessPortIndex
brcdIp.1.1.3.10.3.1.1
Syntax: InterfaceIndex Read-only The port or interface index.