Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 85)

Unified IP MIB Reference 59
53-1003106-01
draft-ietf-idr-bgp4-mibv2-12 MIB
2
bgp4V2NlriLocalPrefPresent
brcdIp.3.5.1.1.9.1.14
Syntax: TruthVal Read-only Indicates if the value is true when the LOCAL_PREF value is
sent in the UPDATE message.
The value is always true.
bgp4V2NlriLocalPref
brcdIp.3.5.1.1.9.1.15
Syntax: Unsigned32 Read-only Specifies the degree of preference of the originating BGP4
speaker for an advertised route.
bgp4V2NlriMedPresent
brcdIp.3.5.1.1.9.1.16
Syntax: TruthVal Read-only Indicates if the value is true when a Multi-Exit Discriminator
(MED) value is sent in the UPDATE message.
bgp4V2NlriMed
brcdIp.3.5.1.1.9.1.17
Syntax: Unsigned32 Read-only Indicates the metric used to discriminate between multiple
exit points to an adjacent autonomous system. When an MED
value is absent but has a calculated default value, the object
will contain the calculated value.
bgp4V2NlriAtomicAggregate
brcdIp.3.5.1.1.9.1.18
Syntax: TruthVal Read-only Indicates if the value is true when the ATOMIC_AGGREGATE
path attribute is present and indicates that NLRI cannot be
made more specific.
bgp4V2NlriAggregatorPresent
brcdIp.3.5.1.1.9.1.19
Syntax: TruthVal Read-only Indicates if the value is true when the AGGREGATOR path
attribute is sent in the UPDATE message.
bgp4V2NlriAggregatorAS
brcdIp.3.5.1.1.9.1.20
Syntax:
InetAutonomousSystemNumber Read-only Specifies an AS number of the last BGP4 speaker that
performed route aggregation. The value of the object is
zero(0) when the bgp4V2NlriAggregatorPresent object is
false.
bgp4V2NlriAggregatorAddr
brcdIp.3.5.1.1.9.1.21
Syntax: Bgp4V2IdentifierTC Read-only Specifies the IP address of the last BGP4 speaker that
performed route aggregation. The value of the object is
0.0.0.0 when the bgp4V2NlriAggregatorPresent object is
false.
bgp4V2NlriAsPathCalcLength
brcdIp.3.5.1.1.9.1.22
Syntax: Unsigned32 Read-only Indicates the value that represents the calculated length of
the AS-Path according to the rules in the BGP specification.
The value is used in route selection.
bgp4V2NlriAsPathString
brcdIp.3.5.1.1.9.1.23
Syntax: SnmpAdminString Read-only Specifies a string depicting the AS-Path to the network, which
is received from the peer that is advertised.
The format of the string is implementation-dependent and it
must be designed for operator readability.
SnmpAdminString is capable of representing a maximum of
255 characters. This may lead to the string being truncated in
the presence of a large AS-Path.
NOTE: It is recommended that when the content of the
object is truncated, the final three octets should be
reserved for the ellipses string (...). The
bgp4V2NlriAsPath object gives access to the full
AS-Path.
Name, OID, and syntax Access Description