Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 504)

478 Unified IP MIB Reference
53-1003106-01
BGP4 general variables
49
• RFC 2385 (TCP MD5 Signature Option)
• RFC 2439 (Route Flap Dampening)
• RFC 2796 (Route Reflection)
• RFC 2842 (Capability Advertisement)
The BGP4 objects apply globally to a device’s BGP4 process.
Name, OID, and syntax Access Description
snBgp4GenAlwaysCompareMed
brcdIp.1.2.11.1.1
Syntax: Integer Read-write Indicates if the comparison of the Multi-Exit Discriminator
(MED) for paths from neighbors in different autonomous
systems is enabled:
•
disabled(0)
•
enabled(1)
snBgp4GenAutoSummary
brcdIp.1.2.11.1.2
Syntax: Integer Read-write Indicates if subnet routes are automatically summarized:
•
disabled(0)
•
enabled(1)
snBgp4GenDefaultLocalPreference
brcdIp.1.2.11.1.3
Syntax: Integer32 Read-write Sets the default local preference attribute.
When the router uses the BGP4 algorithm to select a route to
send to the IP route table, one of the parameters the
algorithm uses is the local preference. Local preference is an
attribute that indicates a degree of preference for a route
relative to other routes. BGP4 neighbors can send the local
preference value as an attribute of a route in an Update
message.
Local preference applies only to routes within the local
autonomous system (AS). BGP4 routers can exchange local
preference information with neighbors who are also in the
local AS; however, BGP4 routers do not exchange local
preference information with neighbors in remote autonomous
systems.
Valid values: 0 – 4294967295
Default: 100
snBgp4GenDefaultInfoOriginate
brcdIp.1.2.11.1.4
Syntax: Integer Read-write Indicates if the default Information Originate is enabled:
•
disabled(0)
•
enabled(1)
By default, the router does not originate and advertise a
default route using BGP4. A BGP4 default route is the IP
address 0.0.0.0 and the route prefix 0 or network mask
0.0.0.0. For example, 0.0.0.0/0 is a default route.
Layer 3 Switches check for the existence of an IGP route with
0.0.0.0/0 in the IP route table before creating a local BGP
route for 0.0.0.0/0.
snBgp4GenFastExternalFallover
brcdIp.1.2.11.1.5
Syntax: Integer Read-write Indicates whether or not automatic resetting of BGP sessions
of any directly adjacent sessions is enabled, if the links used
to reach them go down:
•
disabled(0)
•
enabled(1)
snBgp4GenNextBootNeighbors
brcdIp.1.2.11.1.6
Syntax: Integer32 Read-write The next boot-configured number of neighbors in a BGP peer
group. The minimum value of this object is the value of the
“snBgp4GenMinNeighbors” object. Its maximum value is the
value of the “snBgp4GenMaxNeighbors” object.