beautypg.com

Sntrapifindexassignmentc hanged, Sntrapmodulestatuschang e, Sntrapl2caccesslog – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual

Page 754: Sntrapdot1agcfmremote mepup

background image

728

Unified IP MIB Reference

53-1003106-01

General traps for the Brocade NetIron devices

67

Trap name and number

Varbinds

Severity

Description and trap message

snTrapIfIndexAssignmentC
hanged
brcdIp.0.172

snAgGblTrapMessage

Informational The SNMP trap is generated when the

interface index (ifIndex) assignment for a
physical interface is changed.
Sample trap message:
System: IfIndex assignment was

changed

snTrapModuleStatusChang
e
brcdIp.0.176

snChasUnitIndex,
snAgentBrdIndex,
snAgentBrdModuleSt
atus, and
snAgGblTrapMessage

Notification

The operational state of a module is
changed. The management entity receiving
the notification can identify the module and
the event by referencing snChasUnitIndex,
snAgentBrdIndex, and
snAgentBrdModuleStatus.
If the module is down, the
snAgGblTrapMessage varbind contains a
text string that describes the cause.
If the module is up, nothing is displayed for
snAgGblTrapMessage.
Sample trap message:
For module up: System: Module up in
slot

For module down: System: Module
down in slot ,

reason


For standby MP up: System: Standby
Management Module was ready
For standby MP down: System: Standby
Management Module was down,

reason . Error Code

snTrapl2CAccessLog
brcdIp.0.184

snAgGblTrapMessage

Notification

This trap is generated to provide information
about the state of the I2C access of the
management module.
Sample trap message:
last good i2c access, Mux index

0, Mux tap 0, ID 0x9, Addr 0x1,

(SNM2TEMP)

bad i2c access (GIEI = set),

Severity Minor, Mux index 0,

Mux tap2, ID 0x9, Addr 0x1,

(SNM3TEMP)

snTrapDot1agCfmRemote
MEPAgeOut
brcdIp.0.192

dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage

Warning

This trap is generated when the 802.1ag
Remote MEP ages out.
Sample trap message:
System: Remote MEP 2 in Domain

maint_domain, MA maint_asso

aged out

snTrapDot1agCfmRemote
MEPUp
brcdIp.0.193

dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage

Informational This trap is generated when the 802.1ag

Remote MEP is up.
Sample trap message:
System: Remote MEP 2 in Domain

maint_domain, MA maint_asso

become UP state

This manual is related to the following products: