Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 590)

564 Unified IP MIB Reference
53-1003106-01
PIM neighbor table
55
PIM neighbor table
The PIM neighbor table is a conceptual table that lists the PIM neighbors of the Layer 3 Switch.
NOTE
The following PIM neighbor table is not supported on the Brocade NetIron MLX, Brocade MLXe,
Brocade NetIron XMR, Brocade NetIron CES, Brocade NetIron CER series, and Brocade FastIron
devices.
PIM virtual interface statistics table
The PIM virtual interface statistics table lists the PIM virtual interface statistical counters of the
Layer 3 Switch.
NOTE
This PIM virtual interface statistics table is not supported on the Brocade MLXe, Brocade NetIron
MLX, Brocade NetIron XMR, Brocade NetIron CES, Brocade NetIron CER series, and Brocade
FastIron devices.
Name, OID, and syntax Access Description
snPimNeighborTable
brcdIp.1.2.9.1.8 None The PIM neighbor table.
snPimNeighborEntryIndex
brcdIp.1.2.9.1.8.1.1
Syntax: Integer32 Read-only The table entry index.
snPimNeighborVifIndex
brcdIp.1.2.9.1.8.1.2
Syntax: Integer32 Read-only Shows the value of VifIndex for the virtual interface used
to reach this PIM neighbor.
snPimNeighborAddress
brcdIp.1.2.9.1.8.1.3
Syntax: IpAddress Read-only Shows the IP address of this PIM neighbor.
snPimNeighborUpTime
brcdIp.1.2.9.1.8.1.4
Syntax: Time ticks Read-only Indicates the last time this PIM neighbor became a
neighbor of the local Layer 3 Switch.
snPimNeighborExpiryTime
brcdIp.1.2.9.1.8.1.5
Syntax: Time ticks Read-only Displays the time remaining before this PIM neighbor will
be aged out.
Name, OID, and syntax Access Description
snPimVIfStatTable
brcdIp.1.2.9.1.9 None The PIM virtual interface statistics table.
snPimVIfStatVifIndex
brcdIp.1.2.9.1.9.1.1
Syntax: Integer Read-only The ifIndex value of this PIM virtual interface. There can be
32 entries.
Valid values: 1 - 32