Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 228)

202 Unified IP MIB Reference
53-1003106-01
Switch port information
8
snSwIfStatsAlignErrors
brcdIp.1.1.3.3.5.1.31
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of dot3StatsAlignmentErrors, which consists of
frames received on a particular interface that are not an integral number
of octets in length and do not pass the FCS check.
The count represented by an instance of this object is incremented when
the alignmentError status is returned by the MAC service to the LLC (or
other MAC user). According to the conventions of IEEE 802.3 Layer
Management, received frames for which multiple error conditions are
obtained, are counted exclusively according to the error status presented
to the LLC.
snSwIfStatsFCSErrors
brcdIp.1.1.3.3.5.1.32
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of dot3StatsFCSErrors, which consists of frames
received on a particular interface that are an integral number of octets in
length but do not pass the FCS check.
The count represented by an instance of this object is incremented when
the frameCheckError status is returned by the MAC service to the LLC (or
other MAC user). According to the conventions of IEEE 802.3 Layer
Management, received frames for which multiple error conditions are
obtained, are counted exclusively according to the error status presented
to the LLC.
snSwIfStatsMultiColliFra
mes
brcdIp.1.1.3.3.5.1.33
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of dot3StatsMultipleCollisionFrames, which consists
of successfully transmitted frames on a particular interface for which
transmission is inhibited by more than one collision.
A frame that is counted by an instance of this object is also counted by
the corresponding instance of ifOutUcastPkts, ifOutMulticastPkts, or
ifOutBroadcastPkts and is not counted by the corresponding instance of
the dot3StatsSingleCollisionFrames object.
snSwIfStatsTxColliFrame
s
brcdIp.1.1.3.3.5.1.34
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
This count is a combination of the dot3StatsSingleCollisionFrames and
dot3StatsMultipleCollisionFrames objects.
Name, OID, and syntax Access Description