Snrtudpbcastfwdportnumber, Snrtudpbcastfwdportrowstatus, Udp helper table – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 562: Snrtudphelpertable, Snrtudphelperportindex
536
Unified IP MIB Reference
53-1003106-01
UDP helper table
51
UDP helper table
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, and Brocade
NetIron XMR devices.
A UDP helper table contains addresses that are used to forward a client’s broadcast request for a
UDP application when the client and server are on different networks. There can be up to four
helper addresses on each interface. Helper addresses can be configured on an Ethernet port or a
virtual interface.
snRtUdpBcastFwdPortNumber
brcdIp.1.2.2.9.2.1.1.2
Syntax: Integer
Read-write
Shows the port number for which the UDP broadcast forwarding
feature has been enabled. Possible port numbers are:
•
port(68) – bootpc
•
port(67) – bootps
•
port(9) – discard
•
port(53) – dns
•
port(90) – dnsix
•
port(7) – echo
•
port(434) – mobile-ip
•
port(138) – netbios-dgm
•
port(137) – netbios-ns
•
port(123) – ntp
•
port(65) – tacacs
•
port(517) – talk
•
port(37) – time
•
port(69) – tftp
Other application port numbers can also be specified.
snRtUdpBcastFwdPortRowStatus
brcdIp.1.2.2.9.2.1.1.3
Syntax: RowStatus
Read-write
Controls the management of the table rows. The following values
can be written:
•
delete(3) – Deletes the rows
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snRtUdpHelperTable
brcdIp.1.2.2.9.3.1
None
The UDP helper table.
snRtUdpHelperPortIndex
brcdIp.1.2.2.9.3.1.1.1
Syntax: PortIndex
Read-only
Indicates the port index for a UDP helper address.
For Brocade FastIron or Brocade NetIron products, the value of this
object is from 1 through 42.