Port mac security interface table, Snportmacsecurityintfcontenttable, Snportmacsecurityintfcontentifinde x – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 389: Snportmacsecurityintfcontentsecur ity, Snportmacsecurityintfcontentviolat iontype, Snportmacsecurityintfcontentshut downtime, Snportmacsecurityintfcontentshut downtimeleft, Snportmacsecurityintfcontentageo uttime, Snportmacsecurityintfcontentmaxl ockedmacallowed, Snportmacsecurityintfcontenttotal macs

Unified IP MIB Reference
363
53-1003106-01
Port MAC security interface table
33
Port MAC security interface table
The following table shows the same information as the show port security ethernet slot/port CLI
command.
Name, OID, and syntax
Access
Description
snPortMacSecurityIntfContentTable
brcdIp.1.1.3.24.1.1.3
None
The port MAC security interface table that shows the port MAC
security statistics for an Ethernet interface.
snPortMacSecurityIntfContentIfInde
x
brcdIp.1.1.3.24.1.1.3.1.1
Syntax: InterfaceIndex
None
Shows the ifIndex value of the local interface.
snPortMacSecurityIntfContentSecur
ity
brcdIp.1.1.3.24.1.1.3.1.2
Syntax: Integer
Read- write
Indicates whether MAC port security is enabled or disabled on
this interface:
•
disabled(0)
•
enabled(1)
snPortMacSecurityIntfContentViolat
ionType
brcdIp.1.1.3.24.1.1.3.1.3
Syntax: Integer
Read-write
The port security violation type for this interface:
•
shutdown(0)
•
restricted(1)
snPortMacSecurityIntfContentShut
downTime
brcdIp.1.1.3.24.1.1.3.1.4
Syntax: Unsigned32
Read-write
If snPortMacSecurityIntfContentViolationType is 0 (shutdown),
this value indicates the number of seconds the interface shuts
down when the violation occurs.
If snPortMacSecurityIntfContentViolationType is 1 (restrict),
this value will always be 0.
snPortMacSecurityIntfContentShut
downTimeLeft
brcdIp.1.1.3.24.1.1.3.1.5
Syntax: Unsigned32
Read-only
If snPortMacSecurityIntfContentViolationType is 0 (shutdown),
this value indicates the number of seconds before this
interface will be re-enabled.
If snPortMacSecurityIntfContentViolationType is 1 (restrict),
this value will always be 0.
snPortMacSecurityIntfContentAgeO
utTime
brcdIp.1.1.3.24.1.1.3.1.6
Syntax: Unsigned32
Read-write
The amount of time, in minutes, the MAC addresses learned
on this interface will remain secure. A value of 0 indicates no
aging is in effect.
snPortMacSecurityIntfContentMaxL
ockedMacAllowed
brcdIp.1.1.3.24.1.1.3.1.7
Syntax: Unsigned32
Read-write
The maximum number of secure MAC addresses that can be
locked to this interface.
snPortMacSecurityIntfContentTotal
MACs
brcdIp.1.1.3.24.1.1.3.1.8
Syntax: Unsigned32
Read-only
The total number of secure MAC addresses that are locked to
this interface.
snPortMacSecurityIntfContentViolat
ionCounts
brcdIp.1.1.3.24.1.1.3.1.9
Syntax: Unsigned32
Read-only
The total number of security violations that occurred on this
interface.