Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 515)

Unified IP MIB Reference 489
53-1003106-01
BGP4 neighbor distribute group table
49
BGP4 neighbor distribute group table
The following table lists the BGP4 neighbor distribute group table MIB objects.
snBgp4NeighGenCfgHoldTime
brcdIp.1.2.11.6.1.1.18
Syntax: Integer Read-write Determines how many seconds the device will wait for a
keepalive or update message from a BGP4 neighbor before
deciding that the neighbor is dead.
This object overrides the global settings for Hold Time.
Valid values: 0 or 3 – 65535 seconds (1 and 2 seconds are
not allowed).
If you set the Hold Time to 0, the router waits indefinitely for
messages from a neighbor.
snBgp4NeighGenCfgDefOrigMap
brcdIp.1.2.11.6.1.1.19
Syntax: OCTET STRING Read-write Indicates the name of the default route map. This is an octet
string. Each character is represented by one octet.
Valid values: Up to 32 octets
snBgp4NeighGenCfgDesc
brcdIp.1.2.11.6.1.1.20
Syntax: OCTET STRING Read-write Specifies the name for the neighbor.
Valid values: Up to 80 octets
snBgp4NeighGenCfgPass
brcdIp.1.2.11.6.1.1.21
Syntax: OCTET STRING Read-write Specifies an MD5 password for securing sessions between
the device and its neighbor.
Valid values: Up to 80 octets
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4NeighDistGroupTable
brcdIp.1.2.11.7.1 None The BGP4 neighbor distribute group table.
snBgp4NeighDistGroupNeighIp
brcdIp.1.2.11.7.1.1.1
Syntax: IpAddress Read-only Shows the IP address for this entry.
snBgp4NeighDistGroupDir
brcdIp.1.2.11.7.1.1.2
Syntax: Integer Read-only Indicates if the access list is applied to incoming or outgoing
advertisements:
•
out(0)
•
in(1)
snBgp4NeighDistGroupAccessList
brcdIp.1.2.11.7.1.1.3
Syntax: OCTET STRING Read-write Indicates the access list that will be applied to
advertisements.
This is a number from 1 through 0xFFFF. Each integer is
represented by two octets.