Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 514)

488 Unified IP MIB Reference
53-1003106-01
BGP4 neighbor general configuration table
49
snBgp4NeighGenCfgRowStatus
brcdIp.1.2.11.6.1.1.11
Syntax: Integer Read-write Controls the management of the table rows. The following
values can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns
a "bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
snBgp4NeighGenCfgUpdateSrcLpb
Intf
brcdIp.1.2.11.6.1.1.12
Syntax: Integer Read-write Specifies the loopback interface number for TCP
connections.
Valid values: 0 – 8
Generally, loopback interfaces are used for links to IBGP
neighbors, which often are multiple hops away, rather than
to EBGP neighbors. Zero interface means to restore the
interface assignment to the closest interface, which is called
the best local address.
snBgp4NeighGenCfgRouteRefClien
t
brcdIp.1.2.11.6.1.1.13
Syntax: Integer Read-write Indicates if the option to allow this neighbor to be a router
reflector client is enabled:
•
disabled(0)
•
enabled(1)
snBgp4NeighGenCfgRemovePrivat
eAs
brcdIp.1.2.11.6.1.1.14
Syntax: Integer Read-write Specifies if the option to remove private AS numbers from
update messages that routers sent to this neighbor is
enabled:
•
disabled(0)
•
enabled(1)
If enabled, the router will remove AS numbers 64512 –
65535 (the well-known BGP4 private AS numbers) from the
AS-Path attribute in UPDATE messages the device sends to
the neighbor.
Default: disabled(0)
snBgp4NeighGenCfgEbgpMultihop
Ttl
brcdIp.1.2.11.6.1.1.15
Syntax: Integer Read-write Specifies the time-to-live (TTL) for the neighbor.
Valid values: 0 – 255.
Default: 0. If you leave the EBGP TTL value set to 0, the
software uses the IP TTL value.
snBgp4NeighGenCfgShutdown
brcdIp.1.2.11.6.1.1.16
Syntax: Integer Read-write Indicates if BGP4 neighbor shutdown is enabled:
•
disabled(0)
•
enabled(1)
If enabled, the device shuts down the session with this
neighbor. Shutting down the session allows you to
completely configure the neighbor and save the
configuration without actually establishing a session with
the neighbor.
Default: disabled(0)
snBgp4NeighGenCfgKeepAliveTim
e
brcdIp.1.2.11.6.1.1.17
Syntax: Integer Read-write Indicates how often the device sends keep alive messages.
This object overrides the global settings for the Keepalive
Time.
Valid values: 0 – 65535 seconds
Name, OID, and syntax Access Description