Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 287)

Unified IP MIB Reference 261
53-1003106-01
POS MIB information table
16
POS MIB information table
The following table presents information about the POS session.
snPOSStatsLOP
brcdIp.1.2.14.1.1.1.39
Syntax: Counter Read-only Indicates a loss of pointer (LOP) that results from an invalid path
pointer or if an excessive number of new data flags have been
enabled.
snPOSStatsLOF
brcdIp.1.2.14.1.1.1.40
Syntax: Counter Read-only Shows how many times the interface experienced out of frame
alignment problems, which is also called a loss of frame (LOF)
condition.
snPOSStatsLOS
brcdIp.1.2.14.1.1.1.41
Syntax: Counter Read-only Indicates the number of times the interface experienced a loss of
signal (LOS). With LOS, incoming signals are all zeros during a 100
microsecond period.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snPOSInfo2Table
brcdIp.1.2.14.1.2 None This object describes the POS MIB information table.
snPOSInfo2Clock
brcdIp.1.2.14.1.2.1.1
Syntax: Integer Read-write This object describes the clock source for the POS interface:
•
internal(1) - Internal source.
•
line(2) - Clocking is derived from the line.
Default Value: internal(1)
snPOSInfo2ScrambleATM
brcdIp.1.2.14.1.2.1.2
Syntax: POSStatus Read-write ATM style scrambling for the POS interface:
•
disabled(0) - Scrambling is disabled.
•
enabled(1) - Scrambling is enabled.
Default Value: disabled(0)
snPOSInfo2CRC
brcdIp.1.2.14.1.2.1.3
Syntax: Integer Read-write Length of Cyclic Redundancy Check (CRC) on the POS
interface:
•
crc32bits(1) - 32 bits
•
crc16bits(2) - 16 buts
Default Value: crc32bits(1)
snPOSInfo2KeepAlive
brcdIp.1.2.14.1.2.1.4
Syntax: Unsigned32 Read-write This object describes the keepalive timer for the POS interface
in seconds.
Valid values: 0 - 65535 seconds
Default: 10 seconds
snPOSInfo2FlagC2
brcdIp.1.2.14.1.2.1.5
Syntax: Unsigned32 Read-write The C2 flag.
Valid values: 0 - 255