Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 532)

506 Unified IP MIB Reference
53-1003106-01
BGP4 neighbor prefix group table
49
Name, OID, and syntax Access Description
snBgp4NeighPrefixGroupTable
brcdIp.1.2.11.20.1 None The BGP4 neighbor prefix group table.
snBgp4NeighPrefixGroupNeighIp
brcdIp.1.2.11.20.1.1.1
Syntax: IpAddress Read-only Shows the neighbor’s IP address.
snBgp4NeighPrefixGroupDir
brcdIp.1.2.11.20.1.1.2
Syntax: Integer Read-only Shows the direction of the advertisement to which this filter
will be applied:
•
outgoing(0) – Applied to routes that will be transmitted
to the neighbor.
•
incoming(1) – Applied to routes received from the
neighbor.
snBgp4NeighPrefixGroupInAccessList
brcdIp.1.2.11.20.1.1.3
Syntax: OCTET STRING Read-write If the “snBgp4NeighPrefixGroupDir” object is set to
incoming(1), this object shows the name of the prefix list for
incoming routes.
There can be up to 32 octets in this object.
snBgp4NeighPrefixGroupOutAccessLi
st
brcdIp.1.2.11.20.1.1.4
Syntax: OCTET STRING Read-write If the “snBgp4NeighPrefixGroupDir” object is set
outgoing(0), this object shows the name of the prefix list for
outgoing routes.
There can be up to 32 octets in this object.
snBgp4NeighPrefixGroupRowStatus
brcdIp.1.2.11.20.1.1.5
Syntax: Integer Read-write Controls the management of the table rows. The following
values can be written:
•
delete(3) – Deletes the row.
•
create(4) – Creates a new row.
•
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4)
returns a "bad value" error. Deleted rows are removed from
the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.