Trace route group, General trace route group, Chapter 14 – Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) User Manual
Page 269
Unified IP MIB Reference
243
53-1003106-01
Chapter
14
Trace route group
In this chapter
•
•
•
•
•
•
•
•
•
Trace route group
This group uses the following method to detect routes used to reach a destination address.
1. The originating Layer 3 Switch sends a probe packet (a UDP packet) to the destination address
with a time-to-live (TTL) value of 1.
2. The first Layer 3 Switch that receives this packet decrements the TTL, then drops the packet
and returns a ICMP packet to the originator.
3. The originating Layer 3 Switch records the route in the
4. The originating Layer 3 Switch sends a probe packet (a UDP packet) to the destination address
with a TTL value of 2.
5. The second Layer 3 Switch that receives this packet decrements the TTL, then drops the
packet and returns an ICMP packet to the originator.
6. The originating Layer 3 Switch records the route in
This procedure is repeated until the destination is reached or the maximum TTL is reached.
General trace route group
The following objects define the trace route probe packet.