Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 370)

344 Unified IP MIB Reference
53-1003106-01
TACACS server table (IPv4)
29
TACACS server table (IPv4)
The following objects provide information on the TACACS server. They apply to all IPv4 devices.
NOTE
For FastIron IPv6 devices, refer to “TACACS server table (FastIron X series IPv6 devices)” on
page 344.
TACACS server table (FastIron X series IPv6 devices)
The following objects provide information on the TACACS server. These objects apply to FastIron X
series IPv6 devices.
snTacacsKey
brcdIp.1.1.3.13.1.4
Syntax: DisplayString Read-write Authentication key displayed as encrypted text.
Valid values: Up to 64 characters
A write operation can only be done if the SET request uses SNMPv3
with data encrypted using a privacy key.
snTacacsSNMPAccess
brcdIp.1.1.3.13.1.5
Syntax: Integer Read-only Indicates whether the TACACS group MIB objects can be accessed by an
SNMP manager:
•
disabled(0) – All TACACS group MIB objects return "general error".
•
enabled(1)
Default: disabled(0)
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snTacacsServerTable
brcdIp.1.1.3.13.2 None TACACS server table.
snTacacsServerIp
brcdIp.1.1.3.13.2.1.1
Syntax: IpAddress Read-only Shows the TACACS server IP address.
snTacacsServerAuthPort
brcdIp.1.1.3.13.2.1.2
Syntax: Integer32 Read-write Specifies the UDP port used for authentication.
Default: 49
snTacacsServerRowStatus
brcdIp.1.1.3.13.2.1.3
Syntax: Integer Read-write Creates or deletes a TACACS server table entry:
•
other(1)
•
valid(2)
•
delete(3)
•
create(4)
snTacacsServerRowKey
brcdIp.1.1.3.13.2.1.4
Syntax: DisplayString Read-write Authentication key displayed as encrypted text.
Valid values: Up to 64 characters
snTacacsServerUsage
brcdIp.1.1.3.13.2.1.5
Syntax: Integer Read-write Allows this server to be dedicated to a particular AAA activity:
•
default(1)
•
authenticationOnly(2)
•
authorizationOnly(3)
•
accountingOnly(4)