Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 175)

Unified IP MIB Reference 149
53-1003106-01
Image version
5
snAgSoftwareFeature
(continued)
•
Octet 4, bit 0 – sFlow
•
Octet 4, bit 1 – GVRP
•
Octet 4, bit 2 – GARP
•
Octet 4, bit 3 – Dynamic trunk
•
Octet 4, bit 4 – IGC 8G
•
Octet 4, bit 5 – Rate limit
•
Octet 4, bit 6 – IPC rate limit
•
Octet 4, bit 7 – MPLS
•
Octet 5, bit 0 – IS-IS
•
Octet 5, bit 1 – Link aggregation
•
Octet 5, bit 2 – Port dual mode
•
Octet 5, bit 3 – Private VLAN
•
Octet 5, bit 4 – MBGP
•
Octet 5, bit 5 – IPV6 protocol VLAN
•
Octet 5, bit 6 – X10G
•
Octet 6, bit 0 – FDP
•
Octet 6, bit 1 – Port tag
•
Octet 6, bit 2 – Wireless capable
•
Octet 6, bit 3 – snSwPortVlanId object has changed from
read-only to read-write
•
Octet 6, bit 4 – LLDP
Additional bits are added for new features. Check the MIB file for the
software version you are running.
snAgGblEnableModuleIns
ertedTrap
brcdIp.1.1.2.1.42
Syntax: Integer Read-write Indicates if the SNMP agent process has been enabled to generate
traps for hardware modules that have been inserted in the chassis:
•
disabled(0)
•
enabled(1)
Default: enabled(1)
snAgGblEnableModuleRe
movedTrap
brcdIp.1.1.2.1.43
Syntax: Integer Read-write Indicates if the SNMP agent process has been enabled to generate
traps for hardware modules that have been removed from the
chassis:
•
disabled(0)
•
enabled(1)
Default: enabled(1)
snAgGblEnableTelnetServ
er
brcdIp.1.1.2.1.45
Syntax: Integer Read-write Enables or disables the Telnet server in a device:
•
disable(0)
•
enable(1)
Default: enable(1)
snAgGblTelnetPassword
brcdIp.1.1.2.1.46
Syntax: DisplayString Read-write Contains the Telnet access password, which is only used with an
SNMP-Set. An SNMP-Get produces a zero string. This object can have
48 characters.
This object requires a password to be set for the snAgGblPassword
object.
snAgBuildDate
brcdIp.1.1.2.1.47
Syntax: DisplayString Read-only Shows the date when the software was built. It can display up to 32
characters.
snAgBuildtime
brcdIp.1.1.2.1.48
Syntax: DisplayString Read-only Shows the time when the software was built. It can display up to 32
characters.
Name, OID, and syntax Access Description